Dialogue de l'ombre double
Jérôme Comte - English documentation
Pierre Boulez
Outline
action
Updated at
Vous constatez une erreur ?
The setup and the execution of the electroacoustic part of this work requires a Computer Music Designer (Max expert).
Version Information
- Performance date
- 29 janvier 2011
- Documentation date
- 1 juin 2018
- Version
- Jérôme Comte - English documentation
- Status
- valid
- Validation date
- 3 juin 2018
- Documentalist
- mantovani (maxime.mantovani@gmail.com)
- Realisation
- Frank Rossi (Sound engineer)
- Length
- 20 min
- Upgrade motivation
- English translation Tested with Max 7. Run in 32 bit.
Other Versions
Comte-2025-Milanvalid9 mai 2025
Adamek-2025-Tokyovalid9 mai 2025
Jerôme Comte - Antescofo documented30 janvier 2025
Antescofo - 2024valid23 mai 2024
Antescofo - 2024valid23 mai 2024
Jean Millot - antescofoin_progress29 novembre 2021
ADAMEK-MAX8documented26 novembre 2021
ADAMEK-ROTTERDAMdocumented4 octobre 2019
Flute - Cecile Darouxarchived6 mars 2018
Saxophone - Claude Delanglearchived11 décembre 2017
Widmann2010archived14 novembre 2016
Jérôme Comtedocumented9 avril 2013
Youssef Eisa - Clarinettearchived4 avril 2013
damiens-clarinettearchived20 décembre 2011
billard2010archived9 septembre 2010
transfert_mustica_ftparchived14 avril 2010
Realisation Instructionsarchived1 juin 2000
Detailed Staff
clarinet
Detailed staff comes from Brahms, send mail to ressources-contenus@ircam.fr for correction.
Electronic Equipment List
Audio Equipment
- 1 O2R
- Digital Mixers (Yamaha) - + 1carte analogique 8i/8o+1 carte adat
- 1 DPA 4060
- Condenser Microphones (DPA)
- 6 Loudspeaker
- Loudspeakers (generic)
- 1 HF System
- HF System (generic)
Computer Music Equipment
- 1 Macintosh G4
- Apple Desktops (Apple) - 600 MHz minimum (puissance ideale :1GHz )
- 1 Fireface 400
- Sound Board (RME)
- 1 Midi interface
- MIDI Interfaces (generic)
- 6 Footswitch / Sustain Pedal
- Footswitch / Sustain Pedal (generic) - + boitier 6in-1out
- 1 footswitch control
- MIDI Controllers (MIDI Solution)
- 1 Max 7
- Max (Cycling74)
Downloads
DOD_Comte.zip
Frank Rossi
49.11 Mo
PLAN Dialogue.jpg
158.75 Ko
Instructions
- Open Max 7 in 32 bit. Select Sources folder in the Max file preferences.
- Launch "DOD-ROM_msp_Com-V2.maxpat"
- Configure patch's audio in/out according to your audio interface:
- open Audio status
- set your audio driver,
- sr = 44100,
- scheduler in overdrive on.
- I/O VS 128,
- SVS 64
- output config: Audio from 1 to 6 is affected to the speackers (Refer to the schema)
- output 7 is used to simulate the piano resonance
- output 8 is the mono tape output or ADC1 output. You can select it from the patch : "sound via ADC" or "Direct sound" at bottom right.
- ADC 2 is used for the input of the resonance simulator
- Midi canal 9 can be used to send a top to the light.
- Activate the DSP
- Put the Midi Pedal switch to on
- Select the section to play
- Start the tape with a pedal midi go, or press the space bar.
Stage and Audio Setup
Updated at
Vous constatez une erreur ?
IRCAM
1, place Igor-Stravinsky
75004 Paris
+33 1 44 78 48 43
heures d'ouverture
Du lundi au vendredi de 9h30 à 19h
Fermé le samedi et le dimanche
accès en transports
Hôtel de Ville, Rambuteau, Châtelet, Les Halles
Institut de Recherche et de Coordination Acoustique/Musique
Copyright © 2022 Ircam. All rights reserved.